UA-67804234-2
Navigation

Se leverings terminer på forsiden

Carburetor Rebuild kit GL1000 78-79

Carburetor Rebuild kit GL1000 78-79
Mærke: Barracuda
Produktkode: B-82-204
Lagerbeholdning: Kan bestilles
Pris: 124,00 Kr

Antal:  
   - ELLER -   

Carburetor repair kit to rebuild one OEM 1978 or 1979 GL1000 Keihin carburetor model IDs 769A and 771A.  Owners of non-emissioned control 1978 may have to reuse their primary main and slow air jets. Click to find your carburetor ID.

|n|

VERIFY YOUR CARB IDS PRIOR TO PLACING YOUR ORDER. 
ABSOLUTELY NO RETURNS, EXCHANGES OR REFUNDS ALLOWED!

|n|

Each carb kit contains only those internal application components required to replace impaired interior aperture parts that may be corroded or coated with non-removal fuel additives that are slowing or blocking the normal carburetor interior functions including any necessary internal o-rings, springs and gaskets that are usually replaced in your interior rebuilding project. By Barracuda®.

|n|

NOTE: GL1000's manufactured after December 31, 1977 have press fitted slow air jets which cannot be removed.

|n|

RECOMMENDATION: Kit contains no exterior parts or interior passage plugs that appear on the GL1000 and specifically do not contain manifold connector "O" rings. Joint sealing O-rings, 82-610, are a separate item that we suggest should be replaced when remounting the carbs for a proper manifold vacuum seal.

|n|

DISCLAIMER: WE MAINTAIN THIS KIT IS ABSOLUTELY CORRECT FOR THE MOTORCYCLE YEAR AND MODEL STATED. WE ASSUME NO RESPONSIBILITY FOR YEAR MISIDENTIFICATION, SWITCHED CARBURETORS OR CARB MODIFICATIONS THAT HAS OCCURRED INFREQUENTLY ON THE ENTIRE GL1000 SERIES FROM 1975 to 1979. ALL SALES FINAL!

|n|

Skriv en anmeldelse

Dit navn:


Din anmeldelse: Obs: HTML er ikke oversat!

Vurdering: Dårlig           God

Indtast koden i feltet nedenfor:



Beskrivelse

Carburetor repair kit to rebuild one OEM 1978 or 1979 GL1000 Keihin carburetor model IDs 769A and 771A.  Owners of non-emissioned control 1978 may have to reuse their primary main and slow air jets. Click to find your carburetor ID.

|n|

VERIFY YOUR CARB IDS PRIOR TO PLACING YOUR ORDER. 
ABSOLUTELY NO RETURNS, EXCHANGES OR REFUNDS ALLOWED!

|n|

Each carb kit contains only those internal application components required to replace impaired interior aperture parts that may be corroded or coated with non-removal fuel additives that are slowing or blocking the normal carburetor interior functions including any necessary internal o-rings, springs and gaskets that are usually replaced in your interior rebuilding project. By Barracuda®.

|n|

NOTE: GL1000's manufactured after December 31, 1977 have press fitted slow air jets which cannot be removed.

|n|

RECOMMENDATION: Kit contains no exterior parts or interior passage plugs that appear on the GL1000 and specifically do not contain manifold connector "O" rings. Joint sealing O-rings, 82-610, are a separate item that we suggest should be replaced when remounting the carbs for a proper manifold vacuum seal.

|n|

DISCLAIMER: WE MAINTAIN THIS KIT IS ABSOLUTELY CORRECT FOR THE MOTORCYCLE YEAR AND MODEL STATED. WE ASSUME NO RESPONSIBILITY FOR YEAR MISIDENTIFICATION, SWITCHED CARBURETORS OR CARB MODIFICATIONS THAT HAS OCCURRED INFREQUENTLY ON THE ENTIRE GL1000 SERIES FROM 1975 to 1979. ALL SALES FINAL!

|n|

Skriv en anmeldelse

Dit navn:


Din anmeldelse: Obs: HTML er ikke oversat!

Vurdering: Dårlig           God

Indtast koden i feltet nedenfor:



Biker Shoppen © 2019
Powered by OpenShop (based on OpenCart)